PlyMatrix
Yellow FRP anti-slip sheet with coarse grit surface - PlyMatrix NZ

Anti-Slip Sheet NZ

Yellow coarse grit FRP anti-slip sheet for ramps, stairs, decks and walkways. Won't rust, rot or go green.

Permanent Grip for Slippery Surfaces

Our FRP anti-slip sheet turns a slippery ramp, step or deck into a safe one. It's a rigid fibreglass sheet with a coarse grit surface across the whole face, so it grips in the wet, in the frost and when moss or slime would normally take over. Fix it straight over existing timber, concrete or steel.

It suits outdoor stairs, wheelchair ramps, boardwalks, jetties and dairy sheds anywhere in New Zealand. The high-visibility yellow also marks out steps and edges. Choose from 1200 × 400mm, 1200 × 900mm or full 2400 × 1200mm sheets, cut to size on site, with nationwide delivery.

Need to span an opening or let water drain through? Have a look at our FRP safety grating.

Anti-Slip Sheet Specifications

ProductFlat FRP anti-slip sheet
MaterialFRP (fibreglass reinforced plastic)
SurfaceCoarse grit anti-slip
ColourYellow (high visibility)
Sheet 1200×400mm$49.95 - approx. 4kg
Sheet 1200×900mm$109.95 - approx. 10kg
Sheet 2400×1200mm$285.00 - approx. 25kg
View Prices & Order →

Installation Tips

-Fix onto a clean, dry surface with stainless fixings or a suitable construction adhesive
-Cut to size with a diamond or abrasive blade - wear a dust mask and gloves, FRP dust is an irritant
-Seal cut edges with resin for a tidy finish
-On stairs, cut sheets into treads and fix them right to the nosing, where most slips happen

FRP Anti-Slip Sheet vs Paint or Tape

FRP anti-slip sheetAnti-slip paint or tape
LifespanRigid sheet made for long-term outdoor useWears through on busy steps, needs redoing
Wet & mossy areasWon't rot, rust or go green underfootLifts or peels in the wet
GripCoarse grit across the whole sheetGrip fades as the grit wears off
Covering damageCovers worn or uneven timber in one goShows every defect underneath

The Product Up Close

Where Anti-Slip Sheet Is Used

Stairs & Steps

Cut into treads for outdoor stairs, deck steps and fire escapes that get slippery in the wet.

Ramps

Wheelchair, trolley and loading ramps where grip is needed in all weather.

Decks & Walkways

Overlay mossy or worn timber decks, bridges and boardwalks.

Boat Ramps & Jetties

Jetty walkways and boat ramps that stay wet and grow slime.

Farm & Yards

Dairy shed steps, platforms and races that see constant water and muck.

Commercial & Industrial

Loading docks, plant platforms and walkways that need a safer surface.

Common Questions

What is FRP anti-slip sheet?
It's a flat, rigid sheet of fibreglass reinforced plastic with a coarse grit surface bonded on top. You fix it over an existing timber, concrete or steel surface to give it permanent grip, even when wet.
How much does anti-slip sheet cost in NZ?
Our FRP anti-slip sheet is $49.95 for 1200 × 400mm, $109.95 for 1200 × 900mm, and $285.00 for a full 2400 × 1200mm sheet, all including GST. Request a quote for larger quantities.
Can I use it to make stair treads?
Yes. Cut sheets into tread-sized strips with a diamond or abrasive blade and fix them to each step, running right up to the nosing. The 1200 × 400mm size is a handy starting point for wider steps.
How do I fix anti-slip sheet down?
Use stainless steel screws, or a suitable construction adhesive on a clean, dry surface - or both for high-traffic areas. Stainless fixings won't rust out in wet or coastal spots.
Is it better than anti-slip paint or tape?
For areas that see a lot of foot traffic or stay wet, usually. Paint and tape wear through and need redoing, while a rigid FRP sheet with grit across the whole surface holds up for much longer and also covers worn or uneven timber.
What's the difference between this and FRP grating?
Anti-slip sheet is solid and fixes over an existing surface. FRP grating is an open mesh panel that spans between supports on its own and lets water drain through. See our FRP grating page if you need to span an opening.

Other Products

FRP Grating NZFormply NZMarine Plywood NZFalcata Plywood NZWhite Oak Plywood NZClearance Deals

Get a Quote - FRP Anti-Slip Sheet

Tell us your thickness, sheet count, and delivery location and we'll come back with specs and pricing including freight.

Request a Quote →Call 027 358 0315